![]() Click on Print to send the job to the printer.If the preset is set back to "Standard" or "Standard Presets" when printing, the printer will automatically duplex the job and print banner pages as, by default, that is how those two presets are configured. NOTE: Creating a preset is necessary to save the changes made for the duplex and banner page options. Select All printers to save the setting for this print queue and to make it available for other printer installs even if this print queue is deleted.The preset will be deleted if this print queue is deleted. Select Only This Printer to save the setting only for this print queue.Enter a name for the preset, such as " No Duplex".To these save settings, click on the Presets menu and select Save Current Settings as Preset.Select Xerox Features from the pull-down menu. NOTE: If using Safari or Text Edit and do not see a pull- down menu, click on the arrow to the right of the print queue name to expand the window or choose Show Details. Select Xerox Features from the pull-down menu.Open a document, click on the File menu, and then select Print.NOTE: You will need to save your work in any open application and restart that application to load the defaults that you just modified in the print driver. Click on the OK button to close the Printing Preferences window.If the setting was modified, click on the Apply button to save the new setting.Remove the check mark from the 2-Sided Print check box.Click on the Earth Smart Settings button (green box) at the bottom, left of the window.The Printing Preferences window will be displayed. Right-click on the printer icon, and then select Printing Preferences.For Windows 7 OS, click Start, then Devices and Printers.For Windows 8.1 OS, right-click on Start, click Control Panel, then click Devices and Printers.For Windows 10 OS, click Start, type Control Panel into the search box, click Control Panel, then click Devices and Printers.Click on OK again to send the job to the printer.ĭisable Two-Sided Print in the Print Driver and save as a default setting.NOTE: If the 2-Sided Print option is grayed out, click on the Earth Smart Settings button (green box) at the bottom left of the window, uncheck 2 Sided Print, and then click on OK. Make sure 1-Sided Print is selected from the 2-Sided Printing pull-down menu.The Preferences or Properties window will be displayed. Select the required printer, and then click on the Preferences or Properties button.Open the file to be printed, and then select Print from the File menu. ![]() Earth Smart settings allow you to reduce environmental pollution by reducing the use of materials and energy in the printing process and displays a visual representation of the savings made.ĭisable Two-Sided Print On a Per-job basis in the Application Two-Sided printing is enabled by default on Xerox print drivers that utilize Earth Smart Settings. DocuShare Enterprise Content Management.To print many duplex print jobs in one batch, printing the odd sides ofĪll jobs and then the even sides in just two passes. Its unique feature is its ability to print It can operate as a pipe so that applications can use itĪs a duplex printing driver. It is intended for use on printers connected Is a set of sh scripts that emulates duplex printing (onīoth sides of the paper) for sheet-fed printers that do not supportĭuplex printing in hardware. Hoping no one else reaches the printer before you do. Now print the even- numbered sheets in reverse order with (If it's punched, the holes will now be on the left.) On our II NTX, the paper comes out blank-side up replace it in the tray still blank-side up but rotated 180 degrees. Then arrange the stack of paper for printing on the other side. When printing finishes, if mpage reported an odd number of pages, remove the last one from the stack, since there will be no even-numbered sheet to match it. (Only half this many will really be printed). If you use 3-hole punched paper, put it in the printer such that the holes will appear at the top of the page - on the right as you pull out the printer tray, in our Laser writer II NTX. You can do double-sided printing, in two passes, as follows. Thus -j1-10 selects the first 10 sheets, while -j 1%2 prints just the odd- numbered sheets and -j 2%2 prints just the even ones. Here last defaults to the end of data, interval to 1. Print just the selected sheets, specified by number, starting at 1. If you print from the command line, you can also do this with mpage. Many graphical applications like let you do that. If double sided printing is not supported by your printer, you can also achieve this by printing odd/even (or right/left) pages separately.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |